alaska Multi Polymers is a market leader in rubber industry for last three decades. Alaska Rice Rubber Roll is specially formulated to improve shelling efficiency. It provides the right degree of polish for all kinds of rice. It lasts much longer than conventional rubber roll. Technically advanced equipment used to eliminate blowhole problem. It's attractive shrink sleeve packing protects it from any damage during transportation and it gets to you in it's original shape. Alaska rice Rubber Rolls are manufactured with utmost care to give trouble free service.
Before starting check that the moisture content of the paddy should not be more than 14%.Adjust the alignment of the rice rubber roll and remove any grain present between the rollers before starting the machine.Clearance between the roll should be adjusted to 0.5mm from each other.Immediately after starting the machine if the efficiency is less than 90%, then reduce the clearance to meet efficiency of about 90%-95%.The rolls should not be locked in this position.While operating the machine the feed gate above the rollers must be kept fully opened so that the rollers will wear out uniformly.As the rice rubber roll starts to wear down check the efficiency at a regular interval.Clear the roll of paddy and close the feed gate before switching off the machine.Before turning the rice rubber roll off check that there are no grains between the rollers as this would deform the rubber. Spare rolls must be stored in a dark room and packed well to protect them from direct light and sudden temperature changes.
http://www.alaskaduraflex.com/Alaska-Rice-Rubber-Roll.html
Before starting check that the moisture content of the paddy should not be more than 14%.Adjust the alignment of the rice rubber roll and remove any grain present between the rollers before starting the machine.Clearance between the roll should be adjusted to 0.5mm from each other.Immediately after starting the machine if the efficiency is less than 90%, then reduce the clearance to meet efficiency of about 90%-95%.The rolls should not be locked in this position.While operating the machine the feed gate above the rollers must be kept fully opened so that the rollers will wear out uniformly.As the rice rubber roll starts to wear down check the efficiency at a regular interval.Clear the roll of paddy and close the feed gate before switching off the machine.Before turning the rice rubber roll off check that there are no grains between the rollers as this would deform the rubber. Spare rolls must be stored in a dark room and packed well to protect them from direct light and sudden temperature changes.
http://www.alaskaduraflex.com/Alaska-Rice-Rubber-Roll.html
Comments
Post a Comment